How To Clean and Flush Water Heaters

How To Clean and Flush Water Heaters
October 18, 2013 Admin
how to clean and flush water heaters

How To Clean and Flush Water Heaters For a Cleaner Water

Water heaters can bring danger to your family’s health if not well maintained. The machine carries a lot of water every day which can build minerals that can blend into your water supply and cause health problems in the future.

Water heaters has a cleaning maintenance which homeowners should be aware of to sustain a clean hot water supply and for a long-lasting functionality of your Water Heater Machine. As you may imagine, when a certain container is stocked with water for a long period of time, it can build mineral deposits which can cause a dirty water supply for your family.water heater

To extend the lifespan of your Water Heater, make sure you clean the machine at least once in 2 years depending on its usage and the product model by executing the right flushing procedure. Don’t wait for the machine to stop through its usage because it was just not cleaned because regular cleaning is a great savings in the long run.

Steps on Flushing Water Heaters

Even the cleaning maintenance of a Water Heater requires thorough observation. Follow the procedure carefully to perform an effective cleaning and avoid damages or injuries.

1.    Make sure to turn your water supply off before starting the cleaning process.

On your breaker box, turn off your water heater if you are using the electric-powered one.  For the gas-powered water heaters, set the thermostat to pilot.

2.    The gardening hose must then be securely connected to the valve (which looks like a bib). Make sure the valve is still close as well as the water supply. This draining valve is usually hidden over a removable cover so pay attention when doing the task. Depending on the type of machine you have or the brand of your water heater, just refer to your machine’s manual to know the detailed parts of your water heater.

3.    Open one faucet inside your house, and open the valve on your water heater to release the hot water inside the tank. Be cautious on the direction as to where your hose is facing, always remember to let it face on a larger clear space.

Note: The water must be very hot inside the tank, take precautions on the release of water.

4.    After draining has finished, turn on the water supply again to make sure that the sediments that was left out during the flushing are completely removed inside the tank. After so, close the valve and turn the hot water faucet back on. The water flowing out of the hose must be clear if you can see any discoloration, then the machine may need a longer process of draining until it reaches clear water. If not, refer to a professional one, your water heater might have a problem and may no longer be safe for your use.

5.    Make a test on your pressure release valve. Once the water supply is back and the thermostat has been set to the right temperature, make a test on the inside faucet of your sink to avoid overheating.

Cleaning Water Heaters needs an extreme cautiousness since you are dealing with really hot temperature water. If still unsure of what to do, contact a professional water heater cleaning services to avoid accidents and injuries. The cleaning procedure may also vary from the type and brand of water heater you have at home.water heater

Read your water heater manual if you need to know more about your machine. It is best to gain more knowledge first on your machine’s whole functionality before doing the flushing procedure. Make sure you are wearing safety gears and is following the right cleaning maintenance procedure. If not, the possibility of machine damage is very high which we all not want to happen.

Comments (0)

Leave a reply

Your email address will not be published. Required fields are marked *

*